Description
Link CANJST4 – CAN Connection Cable for Plugin ECU’s (4pin)
Overview
The Link 300mm CANJST4 is required to add CAN communications & power to recently released G4X Plug-in ECU’s which have the new 4 Pin powered CAN connector (not the older 5 pin CAN connector). Plugs directly into the socket on the ECU PCB, provides CAN and a protected 12V supply to allow easy connection of CAN accessories. Suitable for powering a CAN Lambda, Dash, EGT amplifier or other similar low powered CAN devices which have a total continuous current draw of <3A.
Models Supported |
Suitable Plug-ins are listed below:
214-4100 – Plug-in ECU G4X Nissan GTR with E-Throttle 217-4100 – Plug-in ECU G4X Nissan S15 with E-Throttle 233-4000 – Plug-in ECU G4X Honda S2000 AP1 228-4000 – Plug-in ECU G4X Subaru WRX V5-6 237-4000 – Plug-in ECU G4X Honda HC20X Type-R DC5/RSX 238-4000 – Plug-in ECU G4X Subaru WRX11 239-4000 – Plug-in ECU G4X MX5NB2X 240-4000 – Plug-in ECU G4X MX5NB1X 243-4000 – Plug-in ECU G4X WRX11 USDM 241-4200 – G5 ECU Plug-in – Toyota GT86/Subaru BRZ LHD 241-4000 – G5 ECU Plug-in – Toyota GT86/Subaru BRZ RHD |
Specifications
Product Dimensions |
400mm(L)x20mm(W)x20mm(H)
15.75in(L)x0.79in(W)x0.79in(H) |
Product Weight |
35 grams (1.23 ounces) |
Cable Length |
300mm |
Electrical |
Maximum Input Voltage: 300V
Maximum Continuous Current Draw: 3A Gauges of wire: 20AWG/0.5mm2 |
What’s in the Box |
CANJST4 – Link CAN Connection Cable for Plug-in ECUs |
Raw Calibration Specs |
Pin 1: 12V
Pin 2: Ground Pin 3: CAN Low Pin 4: CAN High |
Connector |
DTM4 Male to JST4.
12V and GND Terminated to JST4. |





Reviews
There are no reviews yet.